1. Although Super Décapant is a water soluble product, it is always recommended to take all necessary precautions in order to avoid contact with eyes and skin.
   
   
2. Always work with a bucket of water and a clean cloth to wash out and neutralize any splash of remover that might come into contact with you. In case of contact with skin, rinse with water and clean cloth: the pricking sensation will disappear in no time; in case of contact with eyes, flush with water.
   
   
3. Work in a fresh place away from the sunshine (you can even make your stripping work in winter in a non-heated garage: Super Décapant is not affected by frost: it keeps on working efficiently);
   
   
4. Store your Super Décapant away from any heat source.

Apply a coat of 3mm or more of remover on the surface to strip. Wait 15 to 30 minutes. Let Super Décapant remover work for you, do not rush this step.

With a spatula or a paint brush, remove the residues (which can be used again on another surface). When most of the job is done, re-apply a thin coat of Super Décapant remover and clean with steel wool. Rinse with damp cloth ( use water or mineral spirits if necessary). And wipe dry with clean cloth.

Do not use on plastic, linoleum or rubber.

Remove all obstruction (carpet, ceramic, linoleum…) that would prevent the remover from being directly in contact with the glue.

Pour a coat of 3mm or more of Super Remover directly on the glue. Let work as long as necessary to soften the glue so it can be easily removed with a spatula.

Clean the surface with water (or mineral spirits if necessary).

Finally brush thoroughly the surface with a brush appropriate to the surface, in order to remove dry residues.